Stormwater management system with various applications: Rainwater infiltration, Stormwater attenuation, Rainwater harvesting, 40 tons/HS-20, 410 m³ (14.480 ft³)/Truck
Various applications: Rainwater infiltration, Stormwater attenuation, Rainwater harvesting
- High storage volume
GRAF infiltration modules have three times the storage volume of a standard gravel infiltration ditch. One module therefore takes the place of around 1300 kg (1,4 tons) of gravel or a 50 m (164') drainage pipe. Since you don‘t have to excavate so much soil and enjoy great value for money compared with a standard gravel infiltration ditch, the GRAF modules save you hard-earned cash!
- Service life of over 50 years
A durable product design ensures sustainability. The GRAF EcoBloc system and the Vario 800 flex shaft system is designed for a service life of over 50 years.
- Easy to install
The modules are fitted simply, at speed and in various ways. They can be installed without heavy machinery – one EcoBloc Inspect flex module weighs just 8 kg (17.6 lbs), even only 7 kg (15.4 lbs) for one EcoBloc light.
- Up to 96 % reservoir volume
The GRAF EcoBloc maxx has a gross volume of 225 litres (59.4 US gal.) and a reservoir volume of 217 litres (57.3 US gal.). The EcoBloc variants maxx and Inspect flex still offer a reservoir coefficient of 96 % despite their high load-bearing capacity.
- Installation depth of up to 5 metres (16' 4.8")
Even under very heavy loads, GRAF EcoBloc Inspect flex modules can be installed at a depth of up to 5 metres (16' 4.8"). This means that up to 13 layers are possible. Please consult GRAF when the installation depth is greater than 5 metres.
- BBA Agrément Certificate Number 15/5200 for GRAF EcoBloc maxx
- 5 years warranty
Eco-friendly product – green logistics:
To save space during transport, the EcoBloc maxx and EcoBloc light modules are stacked into each other. This minimizes transport costs, storage space in stock and CO2 emissions.
- Easy installation
The EcoBloc base plate forms the foundations of each EcoBloc system. Up to 13 EcoBloc modules can be fitted on one base plate.
The side faces are sealed with EcoBloc end plates. The EcoBloc system can be adapted to match individual requirements.
EcoBloc maxx base plate
order no.: 402201
Forms the foundation of the EcoBloc maxx system
EcoBloc maxx end plates (Set 2 units)
order no.: 402203
The outside surface of an EcoBloc maxx system is sealed by end plates with contact surfaces DN 100 (4") / 150 (6") / 200 (8") / 250 (10")
order no.: 402015
Set consisting of 10 units
Deaeration end DN 100
order no.: 369017
EcoBloc adapter plate
order no.: 402033
Connectors: Ø 300 mm open , Ø 400 mm and Ø 500 mm possible
Graf-Tex geotextile size 2.50 x 2.50 m
order no.: 231006
for an EcoBloc Inspect flex, Rain Bloc and an infiltration tunnel
order no.: 231002
Material sold by the metre, roll width 5 m